If you're not sure, just go with analog gamepad 2, then press the enable button. Thanks a lot, I'll try that! Just be 100% sure that you did every step 100% correct. The batteries of this controller are replaceble and its a fairly easy fix. Plug the other end of the power cord into the access port on the top of your wireless controller. Neither I've found fits all, so I alternate between them depending on the situation. I won't charge on my pc as well.
Make sure you follow the on-screen prompts to do so after plugging in the dongle. You don't have to install it every time. The software is awesome for quickly changing button layout profiles for different games. Your controller must be listed there. You can either follow the rest of the instructions there, or follow the rest of my instructions here. You can either follow the rest of the instructions there, or follow the rest of my instructions here.
But honestly, you should just get a 360 controller. Also, don't forget to remove everything related to MotionInJoy before attempting this. If not, just don't install Bluetooth Driver, and you're ready to go, press Install. I use Windows 7 64 bits and the following has worked for me. Check out the forums and get free advice from the experts. The charge level on my controller is - even when it is connected via charging cable! The lights don't come on to indicate it is charging, Motioninjoy can't see it, and Windows doesn't have any indication that it is plugged in.
Try bending the cable near the plug etc. You'll also need to install DualShock 4 drivers and select a DualShock 4 controller instead of a DualShock 3. If that doesn't work, then uninstall and reinstall the software. Everything works fine once the controller recognizes that it is plugged in. And then restart your console.
If a different controller works, your first controller is probably broken. I then thought that this was probably my best shot at making it work - i really hope someone can help me make it work! If so an previous update may have messed it up. Once complete, your DualShock 3 will now be plug-and-play, meaning you can plug it in at any time and it should work automatically. Do this with your controller connected to the computer. Hope i can be of help!! You'd think a large company would want to increase availability with consumers, not limit it. I have a simple method to make your controller work, if you're interested, read below, including the warnings. Also tried pressing the reset button but no luck! It wont actually wont have any inputting the games i try to play.
The wikiHow Tech Team also followed the article's instructions and validated that they work. You'll see a list of all devices attached to your computer e. Check the controller to see if it works fine now. Then open up Motioninjoy, plug in the controller and load the driver, it should now give you the option to install the correct drivers. This afternoon, however, when I plugged in a controller literally nothing happened. You can find it along the top of the backside, near the L2 button. It is the successor to PlayStation 2, and is part of the PlayStation brand of consoles.
If you still cannot find a working method, we have one more solution for you. Leave a comment if it worked for you. Or Steam Here is what I've done. Get the same usb type cable with data support. I got a new controller and that doesn't work either. . No you don't need to have Windows 10, although I have it.
I use Windows 7 64 bits and the following has worked for me. I have a simple method to make your controller work, if you're interested, read below, including the warnings. TechMused is a place where you can get solutions to all of the problems that you may face online. The controller is connected to the pc unlike b4 i installed this. The console was first officially announced at E3 2005, and was released at the end of 2006. All i can do even with the hotspot though is just watch stuff on youtube, netflix, hulu, etc.
The driver will be loaded. You can either follow the rest of the instructions there, or follow the rest of my instructions here. Most likely it is the controller or the usb port is broken. This should cause the controller to search for nearby PlayStations to sync with. Your system will restart and boot in a mode that will allow you to alter your firmware and startup settings, thus allowing you to bypass the driver signature enforcement. If not, just don't install Bluetooth Driver, and you're ready to go, press Install. You can either follow the rest of the instructions there, or follow the rest of my instructions here.